Solar Charge Controller PWM 2430
- Rated current: 30 А
- System voltage: Automatic detection of 12V/24V (default) Manual setting
- Nominal power: 12V/450W 24V/900W
- No load consumption: < 13 mA/12V; < 15 mA/24V
- Maximum input voltage from solar modules: < 55 V
- Maximum voltage on batteries: < 34 V
The PWM series solar battery charge controller provides protection against overcharging, deep discharge, overload and short circuit.
It has a wide range of operating modes, which allows the use of controllers with any type of load.
The ability to charge three types of batteries: sealed lead-acid, gel and lithium.
Automatically detects the voltage in the 12V/24V system. Equipped with a graphic LCD display. It has an intuitive interface.
A wide range of operating modes allows the use of the controller with any type of load (street lights, monitoring devices, etc.)
The controller uses a three-stage battery charging algorithm, which allows extending their service life.
| Weight | 390 g |
|---|---|
| Battery type | Flooded FLD; |
| Rated current | 30 А |
| System voltage | Automatic detection of 12V/24V (default) Manual setting |
| No load consumption | < 13 mA/12V; < 15 mA/24V |
| Maximum input voltage from solar modules | < 55 V |
| Maximum voltage on batteries | < 34 V |
| Boost charge voltage | 14.6V; 2/24V |
| Recovery voltage of charge | 13.2V; x2/24V |
| The interval of the equalizing charge | 30 days |
| Time of equalization charge | 1 hour |
| Temperature compensation | -3.0mV/°C/2V |
| Operating temperature | -25°C to +55°C |
| Degree of protection of the case | IP30 |
| Protection | From a short circuit in the solar module circuit and from incorrect connection. From overheating, overload |
| Overall dimensions | 164 х 103,5 х 47 mm |
| Nominal power | 12V/450W 24V/900W |
